kvmfeed.blogg.se - Manual easyuse itt gsm

The main program will start the module directly first and then check the network condition. This routine is mainly to facilitate the user can through the Thony software, directly test and verify the AT instruction transceiving module. Please set the Thonny development environment to be RaspberryPi when setting.Please follow the guides of Raspberry Pi to install and set up Pico for the Pico.įor easy use, we recommend you use the Thonny tool. When in use, it is recommended to connect to the lithium battery: when there is no additional USB power supply, turn on the USB to turn off the lithium battery power supply, switch to VBAT to use the lithium battery power supply When connected to USB power, the USB can be used to charge the lithium battery, power the Pico or write firmware and programs. If you need to use audio, you need to connect a speaker. Pico-SIM868-GSM/GPRS/GNSS x 1 （Pin header should be soldered）.Li-po battery and USB power supply switch

TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT, etc.Įxternal Li-po battery OR Raspberry Pi Pico USB port SIM7020E：Europe/Africa/Australia/Southeast Asia * Depending on the local network service provider Specification Product type

Onboard nano-SIM card slot supports 2G/4G SIM card *.

2x LED indicators, for monitoring the module operating status.

Onboard microphone, together with speaker header, can be used to make phone calls.

Integrates 3.7V Li-po battery connector and recharge circuit, allows being powered from external rechargeable Li-po battery, or recharge it in turn.

RTC real-time clock, with rechargeable Li-po battery.

Bluetooth3.0 support allows Bluetooth data transfer.

Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.

UART communication, serial AT commands control.Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards.This small size and low power module will easily enable your Raspberry Pi Pico multiple functions including making phone calls, sending SMS, 2G communication, global positioning, as well as Bluetooth transmission. The Pico-SIM868-GSM/GPRS/GNSS is a GSM, GPRS, GNSS, and Bluetooth module designed for Raspberry Pi Pico.